No relevant resource is found in the selected language.
Your browser version is too early. Some functions of the website may be unavailable. To obtain better user experience, upgrade the browser to the latest version.
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Disabling Sending of RIPng Packets on an Interface
Disabling Sending of RIPng Packets on an Interface
Context
Disabling an interface from sending RIPng packets is a method of preventing routing loops.
When a device running RIPng is connected to a network running other routing protocols, you can run the undo ripng output command on the interface that connects the device to the network to prevent the interface from sending useless packets to the network.
Procedure
Run system-view
The system view is displayed.
Run interfaceinterface-typeinterface-number
The interface view is displayed.
Run undo ripng output
The interface is disabled from sending RIPng packets.
By default, an interface is allowed to send RIPng packets.