No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the BFD for OSPF Configuration

Verifying the BFD for OSPF Configuration

Prerequisites

All configurations of BFD for OSPF are complete.

Procedure

  • Run either of the following commands to check the BFD session:

    • display ospf [process-id ] bfd session interface-type interface-number [ router-id ]
    • display ospf [process-id ] bfd session { router-id | all }

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174069

Views: 112236

Downloads: 250

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next