No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring IS-IS to Advertise a Default Route

Configuring IS-IS to Advertise a Default Route

Context

If IS-IS is configured to advertise a default route on a border device that has external routes, the device advertises a default route ::/0 in the IS-IS routing domain. All traffic destined for other routing domains is first forwarded to the border device.
NOTE:

Configuring a static default route can also allow all the traffic to be first forwarded to a border device, which then forwards the traffic outside an IS-IS routing domain. However, this method leads to heavy workload in configuration and management when a large number of devices are deployed on the network.

In addition, advertising default routes using IS-IS is flexible. If multiple border devices are deployed, a routing policy can be configured to allow only the border device that meets the specified conditions to advertise a default route, preventing routing blackholes.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run isis [ process-id ]

    The IS-IS view is displayed.

  3. Run ipv6 default-route-advertise [ always | match default | route-policy route-policy-name ] [ cost cost | tag tag | [ level-1 | level-1-2 | level-2 ] ] * [ avoid-learning ]

    IS-IS is configured to advertise a default IPv6 route.

    By default, IS-IS does not advertise a default route.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174069

Views: 128687

Downloads: 274

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next