No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the Interval for Receiving LSAs

Setting the Interval for Receiving LSAs

Context

When a network is unstable, control the minimum interval for receiving the same LSA update. To prevent unnecessary LSA updates caused by network changes, by default, set the interval for receiving the same LSA update to 1000ms.

Do as follows on the router that runs OSPFv3.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run ospfv3 [ process-id ]

    The OSPFv3 view is displayed.

  3. Run lsa-arrival-interval arrival-interval

    The interval for receiving LSAs is set.

    arrival-interval is an integer ranging from 1 to 10000, in milliseconds. By default, the interval for receiving LSAs is 1000 ms.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174069

Views: 143677

Downloads: 280

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next