Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the Interval for Receiving LSAs
Context
When a network is unstable, control the minimum interval for receiving the same LSA update. To prevent unnecessary LSA updates caused by network changes, by default, set the interval for receiving the same LSA update to 1000 ms.
Do as follows on the router that runs OSPFv3.
Procedure
- Run system-view
The system view is displayed.
- Run ospfv3 [ process-id ]
The OSPFv3 view is displayed.
- Run lsa-arrival-interval arrival-interval
The interval for receiving LSAs is set.
arrival-interval is an integer ranging from 1 to 10000, in milliseconds. By default, the interval for receiving LSAs is 1000 ms.
Previous
