No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Priority-based OSPF Convergence

Priority-based OSPF Convergence

Priority-based OSPF convergence ensures that specific routes converge first when a great number of routes need to converge. Different routes can be set with different convergence priorities. This allows important routes to converge first and therefore improves network reliability.

By using priority-based OSPF convergence, you can assign a higher convergence priority to routes for key services so that those routes can converge fast. By so doing, the impact on key services is reduced.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174069

Views: 113757

Downloads: 254

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next