No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Network Management Function of OSPF

Configuring the Network Management Function of OSPF

OSPF supports the network management function. You can bind the OSPF MIB to a certain OSPF process, and configure the trap function and log function.

Applicable Environment

OSPF supports the network management function. You can bind OSPF MIB to a certain OSPF process. In addition, OSPF also supports the trap function and the log function.

Pre-configuration Tasks

Before configuring the network management function of OSPF, complete the following tasks:

Configuration Procedure

Perform one or more configuration tasks (excluding the task of Verifying the OSPF Network Management Function Configuration) as required.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174069

Views: 130238

Downloads: 274

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next