No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the IPv6 IS-IS Route Selection Control Configuration

Verifying the IPv6 IS-IS Route Selection Control Configuration


  • Run the display isis route [ process-id | vpn-instance vpn-instance-name ] ipv6 [ verbose | [ level-1 | level-2 ] | ipv6-address [ prefix-length ] ] * [ | count ] command to check IS-IS routing information.
  • Run the display isis lsdb [ { level-1 | level-2 } | verbose | { local | lsp-id | is-name symbolic-name } ] * [ process-id | vpn-instance vpn-instance-name ] command to check information in the IS-IS LSDB.
Updated: 2019-12-27

Document ID: EDOC1000174069

Views: 199744

Downloads: 356

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next