No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling RIP

Enabling RIP


Enabling RIP is the prerequisite for all RIP-related configurations. If you run the RIP commands in the interface view before enabling RIP, the configurations take effect only after RIP is enabled.


  1. Run system-view

    The system view is displayed.

  2. Run rip [ process-id ] [ vpn-instance vpn-instance-name ]

    RIP is enabled and the RIP view is displayed.

    If a VPN instance is specified, the RIP process belongs to this VPN instance. If no VPN instance is specified, the RIP process belongs to a public network instance.

  3. (Optional) Run description text

    Descriptions for RIP processes are configured.

Updated: 2019-12-27

Document ID: EDOC1000174069

Views: 196494

Downloads: 324

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next