Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Attributes for CSNPs
Context
Complete sequence number PDUs (CSNPs) contain the summary of all the LSPs in an LSDB to ensure LSDB synchronization between neighbors. CSNPs are processed differently on broadcast and P2P links.
On a broadcast link, CSNPs are periodically sent by a DIS device. If a device detects that its LSDB is not synchronized with that on its neighboring device, the device will send PSNPs to apply for missing LSPs.
On a P2P link, CSNPs are sent only during initial establishment of neighboring relationships.
Procedure
- Run system-view
The system view is displayed.
- Run interface interface-type interface-number
The interface view is displayed.
- Run isis timer csnp csnp-interval [ level-1 | level-2 ]
The interval at which CSNPs are sent is set on the specified interface.
By default, the interval at which CSNPs are sent on a broadcast network is 10 seconds.
![]()
Configure Level-1 and Level-2 only when a broadcast interface is specified.
Previous
