No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OSPF GR

OSPF GR

NOTE:
In practical application, in order to realize that business forwarding is not affected by motherboard failure, it is usually possible to configure BGP GR in the hardware environment of dual motherboard to make sense.

All the models support the GR Helper, and only AR3200 series support the GR Restarter.

In Figure 5-29, RouterA, RouterB, RouterC, and RouterD run OSPF for interworking, and RouterA and RouterB are enabled with GR. When RouterA restarts, RouterB helps RouterA perform GR, without notifying other neighbors of RouterA. OSPF GR ensures non-interrupted network traffic.

Figure 5-29 OSPF GR

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174069

Views: 144130

Downloads: 280

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next