Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring OSPF GR
Configuring OSPF GR to avoid traffic interruption and route flapping caused by the active/standby switchover.
Applicable Environment
To avoid traffic interruption and route flapping caused by the active/standby switchover, you can enable OSPF GR.
After the OSPF process is restarted through GR, the Restarter and the Helper reestablish the neighbor relationship, exchange routing information, synchronize the LSDB, and update the routing table and forwarding table. These operations ensure the fast convergence of OSPF and the stability of the network topology.
In practical application, in order
to realize that business forwarding is not affected by motherboard
failure, it is usually possible to configure BGP GR in the hardware
environment of dual motherboard to make sense.
All the models support the GR Helper, and only AR3200 series support the GR Restarter.