No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing OSPF

Clearing OSPF


OSPF information cannot be restored after you clear it. So, confirm the action before you use the command.

To clear OSPF information, run the following reset commands in the user view.


  • Run the reset ospf [ process-id ] counters [ neighbor [ interface-type interface-number ] [ router-id ] ] command to reset OSPF counters.

    • counters indicates OSPF counters.
    • neighbor indicates neighbor information on the specified interface.

  • Run the reset ospf [ process-id ] redistribution command in the user view to re-import routes by OSPF.
  • Run the reset gtsm statistics all command in the user view to clear the GTSM statistics on the board.
Updated: 2019-12-27

Document ID: EDOC1000174069

Views: 195939

Downloads: 324

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next