No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Establishing or Maintaining OSPFv3 Neighbor Relationship

Establishing or Maintaining OSPFv3 Neighbor Relationship

Applicable Environment

In applications, establishing or maintaining the OSPFv3 neighbor relationship is a premise for the construction of an OSPFv3 network. After the configuration in this section, you can:

  • Adjust the convergence speed of the OSPFv3 network and network load posed by protocol packets by modifying OSPFv3 timers.

  • Enable OSPFv3 to be disconnected from its neighbor when the number of OSPFv3 packet retransmissions exceeds the threshold by configuring Retransmission Limitation for OSPFv3. This prevents non-stop packet retransmissions if the neighbor does not receive packets.

  • Speed up the convergence of an OSPFv3 network by adjusting the intervals for updating and receiving LSAs.

Pre-configuration Tasks

Before establishing or maintaining the OSPFv3 neighbor relationship, complete the following tasks:

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174069

Views: 143324

Downloads: 280

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next