No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


As shown in Figure 5-30, OSPF runs between Routers, and GTSM is enabled on RouterC. The following are the valid TTL ranges of the packets that are sent from Routers to RouterC:

  • RouterA and RouterE are the neighbors of RouterC, and their valid TTL range of packets is [255 - hops + 1, 255].

  • The valid TTL ranges of the packets sent from RouterB, RouterD, and RouterF to RouterC are respectively [254, 255], [253, 255], and [252, 255].

Figure 5-30 OSPF GTSM

Updated: 2019-05-17

Document ID: EDOC1000174069

Views: 131409

Downloads: 274

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next