Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OSPF GTSM
As shown in Figure 5-30, OSPF runs between Routers, and GTSM is enabled on RouterC. The following are the valid TTL ranges of the packets that are sent from Routers to RouterC:
RouterA and RouterE are the neighbors of RouterC, and their valid TTL range of packets is [255 - hops + 1, 255].
The valid TTL ranges of the packets sent from RouterB, RouterD, and RouterF to RouterC are respectively [254, 255], [253, 255], and [252, 255].
Previous
