No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Improving the Stability of an OSPF Network

Improving the Stability of an OSPF Network

Stable OSPF networks decrease route flapping frequency, ensure normal device operation, and improve network performance.

Applicable Environment

By configuring timers, you can reduce the number of unnecessary packets on networks and reduce the load on the device to improve network performance.

Pre-configuration Tasks

Before improving the security of an OSPF network, complete the following task:

Configuring Basic OSPF Functions

Configuration Procedure

Perform one or more configuration tasks (excluding the task of Verifying the OSPF Network Stability Optimization Configuration) as required.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174069

Views: 122261

Downloads: 267

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next