No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Disabling Receiving of RIPng Packets on an Interface

Disabling Receiving of RIPng Packets on an Interface

Context

Disabling interfaces from receiving RIPng packets is a method of preventing routing loops.

When a device running RIPng is connected to a network running other routing protocols, you can run the undo ripng input command on the interface that connects the device to the network to prevent the interface from receiving useless packets from the network.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The interface view is displayed.

  3. Run undo ripng input

    The interface is disabled from receiving RIPng packets.

    By default, an interface is allowed to receive RIPng packets.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174069

Views: 112349

Downloads: 252

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next