No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the OSPF Session Parameter Configuration

Verifying the OSPF Session Parameter Configuration


All configurations of session parameters of the OSPF neighbor or adjacency relationship are complete.


  • Run the display ospf [ process-id ] peer command to check information about OSPF neighbors.
  • Run the display ospf [ process-id ] brief command to check brief information about the specified OSPF process.
  • Run the display ospf [ process-id ] retrans-queue [ interface-type interface-number ] [ neighbor-id ] [ low-level-of-retrans-times-range min-time ] [ high-level-of-retrans-times-range max-time ] command to check the OSPF retransmission list.
Updated: 2019-12-27

Document ID: EDOC1000174069

Views: 198027

Downloads: 354

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next