No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling BGP Tracking

Enabling BGP Tracking

Context

BFD can be configured to detect peer relationship status changes in order to implement rapid BGP convergence. BFD, however, needs to be configured on the entire network, and has poor extensibility. If BFD cannot be deployed on a device to detect BGP peer relationship status, BGP peer tracking can be enabled on the device to quickly detect link or peer unreachability, implementing rapid network convergence.

BGP tracking can be used to adjust the interval between peer unreachability discovery and connection interruption. This suppresses BGP peer relationship flapping caused by route flapping and improves BGP network stability.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run bgp { as-number-plain | as-number-dot }

    The BGP view is displayed.

  3. Run peer { group-name | ipv4-address | ipv6-address } tracking [ delay delay-time ]

    BGP peer tracking is enabled on the device to detect the status of a specified peer.

    By default, BGP peer tracking is disabled.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174069

Views: 144115

Downloads: 280

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next