No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Resetting IS-IS

Resetting IS-IS

Context

To reset IS-IS, reset IS-IS data structure, neighbor relationship and packets

The IS-IS data structure cannot be restored after you reset it. All the previous structure information and the neighbor relationship are reset. Exercise caution when running this command.

The specified IS-IS neighbor relationship is deleted after you reset a specified IS-IS neighbor. Exercise caution when running this command.

Procedure

  • Reset IS-IS data structure.

    Run the reset isis all [ [ process-id | vpn-instance vpn-instance-name ] | graceful-restart ] * command to reset IS-IS data structure.

  • Reset IS-IS neighbor relationship.

    Run the reset isis peer system-id [ process-id | vpn-instance vpn-instance-name ] command to reset a specific IS-IS neighbor.

    After the IS-IS routing policy or the protocol changes, you can reset a specific IS-IS neighbor to validate the new configuration.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174069

Views: 111874

Downloads: 250

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next