No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the GR Session Parameters on the Restarter

(Optional) Configuring the GR Session Parameters on the Restarter


  1. Run system-view

    The system view is displayed.

  2. Run ospf [ process-id ]

    The OSPF view is displayed.

  3. Run graceful-restart [ period period | planned-only | partial ] *

    The GR session parameters are set.

    • Set period, the GR period on the Restarter is set. By default, the restart time is 120 seconds.
    • Set planned-only, the Restarter supports only planned GR. By default, the Restarter supports both planned GR and unplanned GR.
    • Set partial, the Restarter supports partial GR. By default, the Restarter supports totally GR.

Updated: 2019-05-17

Document ID: EDOC1000174069

Views: 129716

Downloads: 274

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next