No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the Dead Time of the Neighbor Relationship

Setting the Dead Time of the Neighbor Relationship

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The OSPF interface view is displayed.

  3. Run ospf timer dead interval

    The dead time after which the neighbor relationship between two routers is set.

    By default, the dead time of the neighbor relationship on a P2P or broadcast interface is 40s; the dead time of the neighbor relationship on a P2MP or NBMA interface is 120s; the dead time of the neighbor relationship on the same interface is four times the interval for sending Hello packets.

    NOTE:

    Setting the dead interval of an OSPF neighbor to longer than 20s is recommended. If the dead interval of an OSPF neighbor is shorter than 20s, the session may be closed.

    Both the Hello timer and the Dead timer are restored to their respective default values upon a change to the network type.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174069

Views: 144052

Downloads: 280

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next