No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Controlling Receiving of RIP Routing Information

Controlling Receiving of RIP Routing Information

To meet the requirements of complex networks, receiving of RIP routing information needs to be accurately controlled.

Pre-configuration Tasks

Before controlling receiving of RIP routing information, complete the following task:

Configuration Procedure

You can perform the following configuration tasks (excluding the task of Verifying the RIP Route Receiving Control Configuration) in any sequence as required.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174069

Views: 111770

Downloads: 250

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next