No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Basic BGP Functions

Configuring Basic BGP Functions

Before building a BGP network, you need to configure basic BGP functions.

Pre-configuration Tasks

Before configuring basic BGP functions, complete the following task:

  • Configuring IP addresses for interfaces to ensure network-layer communication between neighbor nodes

Configuration Procedure

Perform the following operations in sequence and as required.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174069

Views: 130234

Downloads: 274

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next