No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the Interval for Sending Update Packets and Maximum Number of Sent Packets

Setting the Interval for Sending Update Packets and Maximum Number of Sent Packets

Context

To limit memory resources occupied by RIP Update packets, set the interval for sending RIP Update packets and the maximum number of Update packets to be sent at a time to appropriate values.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The interface view is displayed.

  3. Run rip pkt-transmit { interval interval | number pkt-count } *

    The interval for sending RIP Update packets and the maximum number of Update packets to be sent at a time are set.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174069

Views: 141228

Downloads: 280

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next