No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration OSPFv3 GR

Configuration OSPFv3 GR

Applicable Environment

To prevent route flapping and service interruption due to the restart of OSPFv3, you can enable OSPFv3 GR.

After OSPFv3 restarts, the GR restarter and the GR helper keep the neighbor relationship, exchange routing information, synchronize the database, and update the routing table and the forwarding table. OSPFv3 fast convergence is thus realized.

NOTE:

Only AR3200 series can function as the restarter router.

Pre-configuration Tasks

Before configuring OSPFv3 GR, complete the following task:

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174069

Views: 123497

Downloads: 269

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next