No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the router to Filter LSAs to Be Sent

Configuring the router to Filter LSAs to Be Sent

Context

When multiple links exist between two routers, you can configure the local router to filter the LSAs to be sent. This prevents transmission of unnecessary LSAs and saves bandwidth resources.

Perform the following steps on the router running OSPF.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The interface view is displayed.

  3. Run ospf filter-lsa-out { all | { summary [ acl { acl-number | acl-name } ] | ase [ acl { acl-number | acl-name } ] | nssa [ acl { acl-number | acl-name } ] } * }

    The LSAs to be sent are filtered.

    By default, the LSAs to be sent are not filtered.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174069

Views: 130324

Downloads: 274

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next