No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating IPv6 Static Routes

Creating IPv6 Static Routes

Context

When creating IPv6 static routes, you can specify both the outbound interface and next hop. Alternatively, you can specify only the outbound interface or next hop based on the outbound interface type.
  • Specify the outbound interface for P2P interfaces.

  • Specify the next hop for NBMA interfaces.

  • Specify the outbound interface for broadcast interfaces. If the next hop address is also specified, it does not need to be a link-local address.

If you specify the same preference for IPv6 static routes to the same destination, you can implement load balancing among these routes. If you specify different preferences for the IPv6 static routes, you can implement route backup among the routes.

If the destination IP address and mask are set to all 0s, an IPv6 static default route is configured. By default, no IPv6 static default route is configured.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Configure IPv6 static routes.
    • Run ipv6 route-static dest-ipv6-address prefix-length { interface-type interface-number [ nexthop-ipv6-address ] | nexthop-ipv6-address } [ preference preference | tag tag ] * [track nqa admin-name test-name | permanent | inherit-cost ] [ description text ]

      An IPv6 static route is configured on the public network.

    • Run ipv6 route-static vpn-instance vpn-instance-name dest-ipv6-address prefix-length { [ interface-type interface-number ] nexthop-ipv6-address | nexthop-ipv6-address [ public ] | vpn-instance vpn-destination-name nexthop-ipv6-address } [ preference preference | tag tag ] * [ description text ]

      An IPv6 static route is configured in a VPN instance.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174069

Views: 111748

Downloads: 250

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next