No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring P2MP Network Attributes

Configuring P2MP Network Attributes

Procedure

  1. Disable OSPF from checking the network mask.
    1. Run system-view

      The system view is displayed.

    2. Run interface interface-type interface-number

      The interface view is displayed.

    3. Run ospf network-type p2mp

      The network type of the OSPF interface is configured.

      A P2MP network is forcibly changed from another type of network. For details, see Configuring Network Types for OSPF Interfaces.

    4. Run ospf p2mp-mask-ignore

      OSPF is disabled from checking the network mask on the P2MP network.

  2. Configure the router to filter the LSA packets to be sent.

    When multiple links exist between two routers, you can configure the local router to filter the LSA packets to be sent. This can reduce unnecessary LSA retransmission attempts and save bandwidth resources.

    1. Run quit

      Exit from the interface view.

    2. Run ospf [ process-id ]

      The OSPF process view is displayed.

    3. Run filter-lsa-out peer ip-address { all | { summary [ acl { acl-number | acl-name } ] | ase [ acl { acl-number | acl-name } ] | nssa [ acl { acl-number | acl-name } ] } * }

      The local router is configured to filter the LSA packets to be sent on the P2MP network.

      By default, the LSA packets to be sent are not filtered.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174069

Views: 130041

Downloads: 274

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next