No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring RIP Neighbors on an NBMA Network

(Optional) Configuring RIP Neighbors on an NBMA Network

Context

Generally, RIP uses a broadcast or multicast address to send packets. If the link running RIP does not support broadcast or multicast packets, specify the RIP neighbors on the two ends of the link so that packets can be sent between the two ends in unicast mode.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run rip [ process-id ]

    The RIP view is displayed.

  3. Run peer ip-address

    The RIP neighbor is configured.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174069

Views: 112982

Downloads: 252

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next