No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Settings for OSPFv3

Default Settings for OSPFv3

Table 6-7 describes the default settings for OSPFv3.

Table 6-7 Default settings for OSPFv3
Parameter Default Setting
OSPFv3 Disabled
Interval of sending Hello packets For the interface of the P2P and broadcast type, the interval for sending Hello packets is 10 seconds. For the interface of the P2MP and NBMA type, the interval for sending Hello packets is 30 seconds.
Dead interval of the OSPFv3 neighbor The dead interval of OSPFv3 neighbor is 40 seconds for the interface of P2P or broadcast type. The dead interval of OSPFv3 neighbor is 120 seconds for the interface of P2MP or NBMA type.
Period during which a router keeps acting as a stub router. 500 seconds
Bandwidth reference value used to calculate the link cost. 100 Mbit/s
Updated: 2019-12-27

Document ID: EDOC1000174069

Views: 195867

Downloads: 324

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next