No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Local PBR

Configuring Local PBR

Pre-configuration Tasks

Before configuring local SPR, complete the following tasks:

  • Setting link layer protocol parameters for interfaces to ensure that the link layer protocol status on the interfaces is Up

  • Configuring an ACL to match packets

  • Creating a VPN instance if you want packets to be forwarded by a VPN instance

NOTE:

Local PBR applies only to locally generated packets.

When the local policy-based routing and the fast ICMP reply function are configured at the same time, the local policy-based routing function does not take effect for ICMP packets. Therefore, if the local policy-based routing function is configured on the device, you are advised to disable the fast ICMP reply function.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174069

Views: 131639

Downloads: 274

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next