No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Interval for Retransmitting LSAs

Configuring the Interval for Retransmitting LSAs

Context

After sending an LSA packet to the neighboring router, the router waits for a response. If no response is received within the set interval, the router retransmits the LSA packet to the neighboring router.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The OSPF interface view is displayed.

  3. Run ospf timer retransmit interval

    The interval for retransmitting LSAs between adjacent routers is set.

    By default, the interval for retransmitting LSAs is 5 seconds.

    NOTE:

    The interval for retransmitting LSAs between adjacent routers cannot be set too small. Generally, the interval needs to be larger than the round trip time of a packet transmitted between two routers. Otherwise, certain LSAs are retransmitted unnecessarily.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174069

Views: 113313

Downloads: 254

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next