No relevant resource is found in the selected language.
MENU
Support Documentation
AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009 CLI-based Configuration Guide - IP Unicast Routing
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Settings for RIP

Default Settings for RIP

Table 3-3 describes the default settings for RIP.

Table 3-3 Default settings for RIP
Parameter Default Setting
Maximum number of equal-cost routes
  • On the AR100&AR120&AR150&AR160&AR200 series, AR1200 series, AR2201-48FE, AR2202-48FE, AR2204-27GE, AR2204-27GE-P, AR2204-51GE-P, AR2204-51GE, AR2204-51GE-R, AR2204E, AR2204E-D and AR2204 is 4.
  • on the AR2220, AR2220E, AR2204XE, AR2240 (using SRU40, SRU60, SRU100E or SRU80), AR2240C, and AR3200 (using SRU40, SRU60, SRU100E or SRU80) series is 8.
  • AR2240 (using SRU200, SRU200E or SRU400), AR3200 (using SRU200, SRU200E or SRU400) and AR3600 (using SRUX5) series is 16.
RIP function Disabled
Split horizon Enabled
Translation
简体中文
Download
Updated: 2020-09-08

Document ID: EDOC1000174069

Views: 336832

Downloads: 456

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next
Enterprise APP

Copyright © 2021 Huawei Technologies Co., Ltd. All rights reserved.

You are going to visit :