No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Adjusting the BGP Network Convergence Speed

Adjusting the BGP Network Convergence Speed

You can configure BGP timers, disable rapid EBGP connection reset, and configure BGP route dampening to speed up BGP network convergence and improve BGP security.

Pre-configuration Tasks

Before configuring adjusting the BGP network convergence speed, complete the following task:

Configuration Procedure

You can perform the following configuration tasks as required. The following configuration tasks (excluding the task of Verifying the BGP Network Convergence Speed Adjustment Configuration) can be performed in any sequence.

Updated: 2019-12-27

Document ID: EDOC1000174069

Views: 196616

Downloads: 324

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next