No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Resetting OSPFv3

Resetting OSPFv3


The OSPFv3 adjacency is removed when you reset the OSPFv3 connection. Exercise caution when running this command.

After modifying the OSPFv3 routing policy or protocol, reset the OSPFv3 connection to validate the modification. To reset OSPFv3 connections, run the following reset ospfv3 command in the user view.


  • To validate the new configuration, run the following commands:

    • reset ospfv3 { process-id | all } [ graceful-restart [ extend-period period ] ]

    • reset ospfv3 { process-id | all } counters [ neighbor [ interface-type interface-number ] [ router-id ] ]

    • reset ospfv3 [ process-id ] statistics maxage-lsa

Updated: 2019-12-27

Document ID: EDOC1000174069

Views: 196498

Downloads: 324

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next