No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring IS-IS to Advertise Specified External Routes to an IS-IS Routing Domain

Configuring IS-IS to Advertise Specified External Routes to an IS-IS Routing Domain

Context

When the local IS-IS device advertises imported external routes to other IS-IS devices, routing policies can be configured to advertise only the external routes that meet specified conditions if these devices do not require all the imported external routes.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run isis [ process-id ]

    The IS-IS view is displayed.

  3. Run filter-policy { acl-number | acl-name acl-name | ip-prefix ip-prefix-name | route-policy route-policy-name } export [ protocol [ process-id ] ]

    IS-IS is configured to advertise the external routes that meet specified conditions to the IS-IS routing domain.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174069

Views: 114026

Downloads: 254

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next