No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Basic RIP Function Configuration

Verifying the Basic RIP Function Configuration

Procedure

  • Run the display rip [ process-id | vpn-instance vpn-instance-name ] command to view the running status and configurations of RIP.
  • Run the display rip process-id route command to view all RIP routes learned from other devices.
  • Run the display default-parameter rip command to view default RIP configuration.
  • Run the display rip process-id statistics interface { all | interface-type interface-number [ verbose | neighbor neighbor-ip-address ] } command to view statistics on the RIP interface.
Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174069

Views: 113505

Downloads: 254

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next