No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling RIPng

Enabling RIPng

Context

Enabling RIPng is the prerequisite for all RIPng-related configurations. If you run the RIPng commands in the interface view before enabling RIPng, the configurations take effect only after RIPng is enabled.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run ripng [ process-id ] [ vpn-instance vpn-instance-name ]

    RIPng is enabled and the RIPng view is displayed.

    If a VPN instance is specified, the RIPng process belongs to this VPN instance. If no VPN instance is specified, the RIPng process belongs to a public network instance.

  3. (Optional) Run description text

    Descriptions for RIPng processes are configured.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174069

Views: 112856

Downloads: 252

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next