No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling OSPFv3 GR

Enabling OSPFv3 GR

Context

Do as follows on the router that runs OSPFv3:

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run ospfv3 [ process-id ]

    The OSPFv3 view is displayed.

  3. Run graceful-restart [ period period | ack-time time | retransmit-interval interval | lsa-checking-ignore | planned-only ] *

    OSPFv3 GR is enabled.

    By default, OSPFv3 GR is disabled.

    ack-time is optional. After ack-time is specified, the restarter can discover more neighbors in the ack-time period.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174069

Views: 142160

Downloads: 280

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next