Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the OSPF Network Security Optimization Configuration
Procedure
- Run the display gtsm statistics { slot-id | all } command to check the GTSM statistics.
- Run the display ospf [ process-id ] request-queue [ interface-type interface-number ] [ neighbor-id ] command to check the OSPF request queue.
- Run the display ospf [ process-id ] retrans-queue [ interface-type interface-number ] [ neighbor-id ] command to check the OSPF retransmission queue.
- Run the display ospf [ process-id ] error [ lsa ] command to check the OSPF error information.
Previous
