No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - IP Unicast Routing

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Stub Routers

Configuring Stub Routers


After a stub router is configured, the route on the stub router will not be preferentially selected. After the route cost is set to the maximum value 65535, traffic generally bypasses the router. This ensures an uninterrupted route on the router during upgrades and other maintenance operations.


  1. Run system-view

    The system view is displayed.

  2. Run ospf [ process-id ]

    The OSPF process view is displayed.

  3. Run stub-router [ on-startup [ interval ] ]

    A stub router is configured.

    By default, no router is configured as a stub router.

    If a router is configured as a stub router, the router continues to function as a stub router for 500s.

    There is no relationship between the stub router configured through this command and the router in a stub area.

Updated: 2019-12-27

Document ID: EDOC1000174069

Views: 187872

Downloads: 316

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next