Defining the Current Area to Be an NSSA Area
Procedure
- Run system-view
The system view is displayed.
- Run ospfv3 [ process-id ]
The OSPFv3 process view is displayed.
- (Optical) Run lsa-forwarding-address { standard | zero-translate }
The OSPFv3 forwarding address (FA) function is enabled.
- Run area area-id
The OSPFv3 area view is displayed.
- Run nssa [ default-route-advertise [ cost cost | type type | tag tag ] * | no-import-route | no-summary | translator-always | translator-interval translator-interval | set-n-bit ] *
An area is configured as an NSSA.
Follow-up Procedure
If an area is configured to the NSSA area, all routers of the area must be configured with the NSSA attribute.
The area may be updated after NSSA attributes are configured or deleted. Thus, the NSSA attributes can be re-configured or deleted only after the last update of NSSA attributes is complete.