No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Settings for LLDP

Default Settings for LLDP

Table 6-5 lists the default settings for the LLDP configuration parameters.

Table 6-5  Default settings for LLDP

Parameter

Default Setting

LLDP

Disabled globally

Interval for sending LLDP packets

30 seconds

Delay in sending LLDP packets

2 seconds

Hold time multiplier of device information on neighbors

4

Delay in initializing interfaces

2 seconds

Delay in sending a notification after neighbor information changes

5 seconds

Type of the type-length-values (TLVs) that an interface can send

All types of TLVs except the Location Identification TLV

Standard with which the 802.3 Power via MDI TLV sent by the interface complies

802.1 ab

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174072

Views: 108477

Downloads: 346

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next