No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Exporting of IPv4 Unicast Original Flow Statistics

Configuring Exporting of IPv4 Unicast Original Flow Statistics

Once exporting of IPv4 unicast original flow statistics is configured, the NDE collects statistics about IPv4 unicast flows and exports each flow statistics to the NetStream server for further analysis.

Pre-configuration Tasks

Before configuring exporting of IPv4 unicast original flow statistics exporting, complete the following tasks:

  • Set physical parameters of interfaces.
  • Set the link-layer attributes of each interface.
Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174072

Views: 100643

Downloads: 332

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next