No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing TCP FPM Statistics

Clearing TCP FPM Statistics


To understand the quality of the network running TCP applications, clear existing TCP FPM statistics first, and then collect new statistics. From the latest statistics, you can know the network status in real time.

Statistics cannot be restored after being cleared. Exercise caution when you run the following commands.


  1. Run the system-view command to enter the system view.
  2. Run the reset tcp fpm session all command to clear TCP FPM statistics.
Updated: 2019-05-17

Document ID: EDOC1000174072

Views: 100899

Downloads: 333

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next