No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for LSDP

Licensing Requirements and Limitations for LSDP

This section provides the points of attention when configuring LSDP.

Involved Network Elements

None

Licensing Requirements

LSDP is a basic feature of a router and is not under license control.

Feature Limitations

LSDP is supported by only Layer 3 Ethernet interfaces.

An AR3200 has active/standby MPUs installed. An active/standby switchover between the MPUs will also cause the interface status to alternate between Down and Up. It is difficult to determine whether the interface status change is caused by MPU switchover or LSDP. Therefore, you are not advised to configure LSDP on an AR3200.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174072

Views: 100266

Downloads: 332

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next