No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
UDP Test

UDP Test

The NQA UDP test measures the time taken for communication between an NQA client and a UDP server.

The UDP test process is as follows:

  1. The source (RouterA) constructs a UDP packet and sends it to the destination (RouterC).

  2. The destination receives the packet and returns it to the source.

    After receiving the UDP packet, the source calculates the time taken for communication between the source and the destination by subtracting the time the source sends the UDP packet from the time the source receives the UDP packet. The test result reflects UDP performance on the network.

Figure 7-12  Network for UDP test

UDP test results and historical records are collected in test instances. You can run commands to view the test results and historical records.

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000174072

Views: 109368

Downloads: 346

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next