No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Network Management and Monitoring

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R009

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing NQA Test Statistics

Clearing NQA Test Statistics


To obtain the latest test results, clear the current test results by running the following commands.

  • Statistics cannot be restored after being cleared. Confirm the action before you run the commands.
  • Statistics on the running test instance cannot be cleared.


  1. Run system-view

    The system view is displayed.

  2. Run nqa test-instance admin-name test-name

    The NQA view is displayed.

  3. Run clear-records

    The statistics about NQA test instances are cleared.

  4. Run return

    Return to the user view.

  5. Run reset ip nqa-compatible responder statisticsThe statistics on the NQA handshake packets sent from the third-party device or NMS software are cleared.

Updated: 2019-05-17

Document ID: EDOC1000174072

Views: 122173

Downloads: 372

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next